 |
 |
 |
|---|---|---|
Melt Flow Rate (230℃,2.16kg) (g/10min) |
D 1238L | 9.0 |
Density (g/㎤) |
D 1505 | 0.9 |
Flexural Modulus (kg/㎠) |
D 790 | 15000 |
Tensile Strength at Yield (kg/㎠) |
D 638 | 250 |
Elongation at Yield (%) |
D 638 | 5.5 |
Izod Impact Strength(23℃) (kg㎝/㎝) |
D 256 | 15 |
Izod Impact Strength(-20℃) (kg㎝/㎝) |
D 256 | 5 |
Rockwell hardness (R scale) |
D 785 | 80 |
|
 |
|
|---|---|---|
Melt Flow Rate (230℃,2.16kg) (g/10min) |
ISO 1133 | 9.0 |
Density (g/㎤) |
ISO 1183 | 0.9 |
Tensile Stress at Yield (23℃, v = 50 mm/min) (MPa) |
ISO 527-1,-2 | 23 |
Tensile Strain at Yield (23℃, v = 50 mm/min) (%) |
ISO 527-1,-2 | 4 |
Tensile Modulus (23℃, v = 1 mm/min, Secant) (MPa) |
ISO 527-1,-2 | 1450 |
Charpy impact strength, Unnotched(23℃) (kJ/㎡) |
ISO 179/1eU | NB |
Charpy impact strength, Unnotched(0℃) (kJ/㎡) |
ISO 179/1eU | 140 |
Charpy impact strength, Unnotched(-20℃) (kJ/㎡) |
ISO 179/1eU | 90 |
Charpy impact strength, Notched(23℃) (kJ/㎡) |
ISO 179/1eA | 7 |
Charpy impact strength, Notched(0℃) (kJ/㎡) |
ISO 179/1eA | 4 |
Charpy impact strength, Notched(-20℃) (kJ/㎡) |
ISO 179/1eA | 3.8 |
Vicat softening temperature (VST/A/50 K/h (10N)) (℃) |
ISO 306 | 144 |
HDT B (0.45 MPa) Unannealed (℃) |
ISO 75B-1,-2 | 76 |
a) The above values are only for guide : not to be construed as specifications.
b) Before using a Polymirae product, customers and other users should make their own independent determination that the product is suitable for the intended use. They should also ensure that they can use the Polymirae product safely and legally. This document does not constitute a warranty, express or implied, including a warranty of merchantability or fitness for a particular purpose. In addition, no immunity under Polymirae's or third parties' intellectual property rights shall be implied from this document. No one is authorized to make any warranties, issue any immunities or assume any liabilities on behalf of Polymirae except in a writing signed by an authorized Polymirae employee. Unless otherwise agreed in writing, the exclusive remedy for all claims is replacement of the product or refund of the purchase price at Polymirae’s option, and in no event shall Polymirae be liable for special, consequential, incidental, punitive or exemplary damages.
c) This grade is not suitable for medical applications.
