Moplen EP500N Data Sheet
- Houseware, Electric appliance
- Moplen EP500N is the polypropylene block copolymer manufactured by PMC under the license of BASELL using the Spheripol process. Moplen EP500N is a block copolymer selected by customers in used in injection molding of containers, parts of electrical appliances, crates and pails.
Moplen EP500N resin meets the FDA requirements in the Code of Federal Regulations in 21 CFR 177.1520 for food contact. - Product Features
- Optimized balance of stiffness and toughness/High impact strength at low temperature/Low warpage
- Typical Applications
- Parts of electrical appliances/Pail/Housewares
 |
 |
 |
|---|---|---|
Melt Flow Rate (230℃,2.16kg) (g/10min) |
D 1238L | 12 |
Density (g/㎤) |
D 1505 | 0.9 |
Flexural Modulus (kg/㎠) |
D 790 | 11500 |
Tensile Strength at Yield (kg/㎠) |
D 638 | 270 |
Elongation at Yield (%) |
D 638 | 6 |
Izod Impact Strength(23℃) (kg㎝/㎝) |
D 256 | 10 |
Izod Impact Strength(-20℃) (kg㎝/㎝) |
D 256 | 5 |
Rockwell hardness (R scale) |
D 785 | 95 |
a) The above values are only for guide : not to be construed as specifications.
b) Before using a Polymirae product, customers and other users should make their own independent determination that the product is suitable for the intended use. They should also ensure that they can use the Polymirae product safely and legally. This document does not constitute a warranty, express or implied, including a warranty of merchantability or fitness for a particular purpose. In addition, no immunity under Polymirae's or third parties' intellectual property rights shall be implied from this document. No one is authorized to make any warranties, issue any immunities or assume any liabilities on behalf of Polymirae except in a writing signed by an authorized Polymirae employee. Unless otherwise agreed in writing, the exclusive remedy for all claims is replacement of the product or refund of the purchase price at Polymirae’s option, and in no event shall Polymirae be liable for special, consequential, incidental, punitive or exemplary damages.
c) This grade is not suitable for medical applications.
Moplen is a trademark of PolyMirae Company Ltd. Copyrightⓒ PolyMirae Company 2007